Tag Archives: Anfibio Delta MX

Tested: Anfibio Alpha XC packraft review

anfibiologoalfa - 21The Packrafting Store in Germany was one of the first Alpacka dealers in Europe, but now sells several other brands of packrafts from China, Russia and the US. It’s probably the only ‘packrafting supermarket’ of it’s kind and in 2015 we group tested a selection of their boats.
anfibsThey also produce their own Anfibio branded packrafting gear, like the dry suit and inflatable jacket I use myself; the latter has become my go-to ‘pfd’. anfi - 10In cooperation with MRS in China whose boats they were the first to import into Europe and whose design they’ve influenced, they’ve now added three lightweight Anfibio packrafts to their lineup of over a dozen boats: the Sigma TX double; Delta MX single and smallest and lightest Alpha XC which we tested here. I knew the XC would be too small for me so that job went to my g-friend who’s over a foot shorter and 40+ kilos lighter. It costs just €470 plus one type of seat or another.

anfi - 5Alpha symmetry
In a bid to keep costs down and make them the lightest in their class, Anfibios are all symmetrical, with identical bows and sterns and parallel sides. Unless it’s like their double-elongated Barracuda R2, a conventionally short stern can make a boat back-heavy without a balancing load over fx1-mepadthe bow, as right. Even my original, first-generation green Alpacka Llama had a fattened stern to compensate for this. This is why Alpacka’s now much-copied elongated stern from 2011 (my 2014 Yak, above left) was such a clever innovation. It trimmed (‘levelled’) the boat by effectively positioning the paddler more centrally and also acted as a skeg to further reduced the side-to-side yawing of the bow which short, wide packrafts are prone to. (It’s important to recognise this yawing is just an annoying left and right ‘nodding’ of the bow; people often confuse it with tracking (‘steering’ or going where you point it) which packrafts do better than some kayaks.

Weights and measures **
anfi - 9alfameAfter checking the kitchen scales (1000ml = 1000g √) the Alpha weighed in at 1822g out of the box; the bare boat was 1422g.
Interestingly, at 120cm the interior length is actually a bit more than my Alpacka Yak. At 185cm tall, I can sit in the Alpha with backrest deflated and with the same comfortable knee-bend as my Yak. Meanwhile, with legs flat on the floor g-friend has some 15cm of foot room to spare up front.
anfi - 8Anfibio have missed a trick here. Assuming I am at the upper level of average adult height and weight, and geef is at the other end, I think Anfibio could offer another model 10 or even 20cm shorter, more like Alpacka’s ultrabasic Scout (right); Scoutlet’s call it an Omega XS. There are many, many packrafts for people of my height or more, but very few for 5-footers if you take the view, as I do, that in a packraft you want to fit snugly, feet pressing against the bow with knees slightly bent. Being shorter would make the ‘Omega’ at least 200g lighter and enable that snug fitting for the majority of shorter-than-me persons. Like a shoe that fits right, that means better control, comfort and efficiency and is one reason I choose to replace my original Llama with the shorter Yak. Perhaps there are buoyancy issues in such a short boat which means tubes need to be fatter, speed suffers and you effectively end up in a slackraft. You don’t want that.
The 25-cm side tubes are the slimmest of the Store’s dozen-plus boats, but we both found the 32cm interior width, a bit tight for comfort. Slimmer hipped individuals will feel right at home. All this doubtless carefully juggled volume, length and width adds up to a recommended payload rating of 110kg. That’s plenty for most folks who are lighter than me. The next-size-up Anfibio Delta MX weighs only another 225g but is rated at a massive 180kg.

** May not all exactly match Anfibio’s figures

alphaxcdims

The hull is made from the 210D, single-coated TPU, sewn and heat welded (no glue). Most packrafts are made from this wonder fabric. I think the slight translucence of the yellow Alpha makes it appear thinner than my Alpacka alfa2botsYak, but feeling the fabrics up, they’re the same or very similar.
You’ll notice that, unusually, the taped join of the tubes is around the perimeter of the boat, not hidden under where the floor attaches to anfi - 3the hull.
The floor is smooth, double-coated 420D TPU and feels tough without making the boat bulky when rolled up. The width of the heat-welding attaching it to the hull is little more than a centimetre in places. Perhaps putting the side tube join elsewhere eliminates a weak spot at the floor and reduces the need for excessive overlap, as with the 8cm on my Yak of the Longshore. As it is, we’re assured that TPU hull fabric will tear before a properly heat-welded join separates, but as with any packraft, I’d be careful putting too much pressure on the floor. “Get in bum first!” I had to remind my tester.

anfi - 4Fittings and finish
The Alpha comes with 5 taped loops with a pleasing textured Cordura finish to the patches. As other reviewers and the commenter below have mentioned, the three on the bow look too close together to securely lash down a load, far less a bike; the ‘triangle’ is too small and positioned over the domed bow. I also feel the fitting points are the wrong way round: you want the single central point at the front and the other two behind on the next panel back. Glue two here and you’ll have a stable, 4-point lashing base with another tab to spare.
I don’t really see the value of attachment points on the already over-loaded stern of a packraft, especially when it’s not elongated. I’d sooner load stuff centrally, under my knees and have a single loop here to hang shoes off or for towing.
anfi - 13The inflation valve follows MRS’ innovation in fitting a Boston valve as commonly found on cheap Slackrafts (about the only useful thing on them). For a short, low-pressure boat like a packraft (as opposed to an IK) bosvalvBoston valves are ideal. A Boston valve has two caps; the bigger one opens the main port for fast inflation / deflation. On top of that is a smaller square cap; unscrew that to access the one-way mushroom/flap valve and top-up the boat by mouth. Both caps also have nifty swivelling attachment collars so you can’t lose them while also making the caps easy to turn. The whole set-up is so much better than my old-Alpacka style dump valve which you need to secure with a line which gets in the way as you try and quickly screw it up. It also eliminates the separate twist-lock elbow valve which never felt that solid and being small bore, is harder to blow through and get a good fill, unlike the 2cm-wide Boston.
The supplied air inflation bag (see video here) is a denier or two up on my flimsy Yak one which I often think is on the verge of ripping apart. I also like the fact that it’s a bright dayglo green; you never know when you might need a signalling device.
anfi - 2The seat resembles an old-style Alpacka base with backrest, except that it cleverly attaches to the back of the floor with a single adjustable strap and buckle. Simple and effective; that is all that is needed to keep the light seat in place compared to my Yak’s OTT arrangement. You also suspect that the length of this strap may have been designed to enable a shorter paddler to position the seat a little forward so as to shove a anfi - 17bag behind it (left). Doing this centralises their weight and helps level off the trim to reduce yawing. We tried this idea on the water – see below.
One thing I recall of a similar seat on my old Llama was the annoyance of the backrest flopping forward every time I got in (an elastic fixed that). Taller Alpha XC paddlers: consider saving €34 by ordering the plain seat base and simply lean on the back of the boat instead of using the €59 backrest version. That’s what I did briefly paddling the Alpha and it felt fine.
anfi - 16Yes but what about the strap, you ask? Well that weighs in at 22g but is a good half-a-metre longer than it needs to be to cinch the rolled-up bundle (left), so some weight could be saved by snipping it.
anfi - 11As for build quality. With only my 2014 Alpacka to compare, all the taping and fitments are as neatly applied. The lack of tape over the floor panel join exposes a slightly uneven cut in places and, as mentioned, the welded band looked rather slim. The Store rates the Alpha’s durability accordingly as a result of all this weight saving, but it’s unlikely they’ve gone too far as Alpacka may have done with their short-lived Ghost. It only lasted a season or two.

On the water
alfamapalfa - 2With light winds forecast, we picked an easy circuit with about 4km of loch paddling (right) and a couple of short portages where we could carry the inflated boats. We often paddle together in the Seawave but I’m not sure if the g-friend has paddled a packraft since a quick go in my Llama back in 2010. So this would be a good test on how a beginner handled the Alpha.
alfa - 3alfa - 4Once the Alpha was inflated, geef went out for a spin to get a feel for the boat, then came back and went out again with my empty Chattooga dry bag behind the seat back (this bag seals 100% against air leakage – a true ‘dry bag’). No surprise: she yawed less and felt more in control sat more centrally. With another bag of stuff under her knees the boat sat almost level. Watching her paddle she still looked a bit low in the boat which interfered with a good paddling technique, so we pulled ohsix - 9over and pumped the seat right up and I advised trying a high-angle paddling (right) to clear the sides and get a fuller draw from the blades. As it is, on flat water no packraft is actually that satisfying to paddle – unlike a slick kayak there is no glide. The fun lies in the places they can reach and the ease of getting them there.

alfa - 9

We emerged onto the west end of Sionascaig loch (above) surrounded by the dramatic mountains of the Assynt, and turned south for the sluice. Being thorough, we tried sat right back without the bag one more time, but got the same high-bow yawing. Even with the bag I still observed some yawing, but as it was intermittent it could be down to my test pilot’s as yet unrefined packraft paddling knack, just as it can be trying to get a hardshell to go straight the first few times. Yawing is not tracking – this boat will go where you point it, but you’d imagine the pivoting is inefficient. A bit like moving off from standstill on a bicycle, my Yak also yaws wildly as I set off, but settles down once there’s some directional momentum, nodding maybe six inches left and right.alfa - 14
alfa - 16We clambered around the sluice (left) and sat down on a tiny beach below for a snack, then I went out for a quick spin in the Alpha.
At nearly twice the alfa - 18weight and of course without the dry bag behind, the boat was back heavy and very easy to spin. A light breeze was now blowing little wavelettes up the loch and powering on too hard, it shipped a little water over the back sides at one point. I reached back and felt the horizontal tape line was below the water, but the Alpha was nowhere near as edgy as the Supai Flatwater Canyon II in which I dared not even breath in too fast. Yes it yawed more than my Yak but long, smooth strokes minimise that. I’d be more concerned in less calm water, but then I’m clearly on the weight limit for the Alpha. I probably could have done this whole circuit in it but would have had to be careful which is not conducive to relaxation.

alfa - 23

Through the shallow narrows we passed alfa - 22arriving at the next ‘sluice’ at the end of the loch. It’s actually a runable two-foot drop if you take it fast. Like last time I came here, I wondered about trying it for fun, but chickened out. Beyond the pool below it becomes steep, narrow burn dropping to the next loch. So we tramped through the springy heather made crisp by over a fortnight without rain. We chucked the boats over a nasty wire fence then set off across the last little loch and the short walk back to the car.

 

Bravo Alpha
alfa - 8Being a large person, the benefits of saving a kilo or two add up to not much in my overall packrafting mass. Therefore I don’t resent the weight of my Yak for its benefits in durability and functionality. But not everyone thinks like me. Adventure racers, canyoneers and something called ‘fast-packers’ focused on absolute minimal weights while undertaking short or easy crossings will love this boat. So too might a travelling cyclist or a light person who just wants a handy, inexpensive packraft for the odd evening splashabout rather than an expedition-ready heavy hauler. The yawing is something you can minimise with good technique or balance-out with frontal loads or weight shifting, as we did.
For the price of just €470 + seat, this must be the cheapest decent packraft around. No one likes excess weight but I know I’d feel more confident paddling a proper TPU packraft like the Alpha over Supai’s amazingly light but unnervingly skimpy alternatives The extra 700 grams I can save in peace of mind.

Anfibio Alpha XC at the Packrafting Store
Tirio outfitters in Wales use Anfibio boats

alfaline


 

We also recently tried out the Longshore EX280 double. Read about it here.

longblue

Packrafts: alternatives to Alpacka

Updated summer 2020
Don’t tell me you missed the general packraft intro?

supai22

For sporty rivers, inshore use and touring, Alpacka’s comprehensive and innovative range lead the field for many years, but now several alternatives are now on the market, mostly made in China then domestically re-branded. As you’ll soon see, there’s nothing wrong with that.
Some copy Alpackas, a couple go out of their way to be different and some are ‘crossrafts‘ suited only to calm rivers, short crossings and flatwater. These prioritise ultra light weight over durability which can be a gamble outside of shallow, tropical lagoons. As in Alpacka’s range, still others are designed to carry heavier loads, be as light as possible or for all-out white water.

slackers

Don’t forget that at any waterside holiday resort you can always buy cheap PVC ‘slackraft’ pool toys (left) that are OK while they last. Slackrafts get their own page on IK&P and are a great way of investigating the packrafting experience before you splash out on the real thing.

pakGTbanner

Most of the boats described below I’ve only seen and evaluated from pictures, but in 2015 we tested four packrafts from MRS, Aire, Nortik and Supai alongside my 2014 Alpacka Yak. To read more about our actual observations and conclusions (as opposed to this page’s web speculation) click this or the banner on the right. Of course things have moved  on since then.   See also the MRS Nomad S1 kayakraft (below).

S1 - 44

A word about denier – a unit of measurement used to describe the weight (not the thickness) of a material. It is calculated on the mass in grams of a single 9000m strand using one 9000-m long strand of silk as a reference for one denier). It’s a mistake to think a fabric made from 210D nylon will be three times thicker and three times stronger than 70D. The thread or yarn used ought to weigh three times more so will be stronger and more resistant to tearing, but not as a factor of the D-rating.

alfa - 4

Crossrafts
What have been dubbed crossrafts are sub-category of packrafts – very light rafts made from nylon or polyester with a coating onside (like your tent or backpack) as opposed to much more durable exterior coating found on TPU; the shiny stuff of a normal packraft.
They are best suited to crossing calm bodies of water rather than paddling along them, far less tackling white water, though this doesn’t seem to stop people trying. The low prices and light fabric enables weights of well under a kilo, making the link between slackrafts and packrafts. But because of the fabric you do lose out on durability, performance and response from the stiffer TPU hulls found on packrafts like an Alpha XC (left) which still weighs much less than 2kg and gives you more peace of mind when travelling along in remote locales.

supai-packraft-dimensions

Supai Flatwater Canyon II
As the name suggests, the 670g Supai Flatwater II is an ultra-light crossraft suited to small lochs, canyoneering or following calm rivers. With its narrowed and tapered bow, it resembles the much admired Sevylor Trail Boat – the Lost Prince of Slackrafts – and at the time appeared to be a more sophisticated. The Supai’s dimensions as measured by me added up to 92cm wide, 157cm long and 106cm inside. We tried one – read about it here. A couple of years later we also tried the fatter Matkat version.


nrspackraft

NRS Packraft
NRS’ tough MaverIK introduced me to inflatable kayaking in Idaho all those years ago – I nearly bought one right on the spot. A while back they added a packraft to their line up. At 203cm long and 91cm wide (33cm x 142cm inside), the NRS Packraft is a roomy boat weighing 3.35kg with the removable floor, or 5.6lbs / 2.54kg without, so it’s too heavy to be a true crossraft.
Like a Supai it’s made from PU-coated nylon: 70D in the tubes and a floor in 210D. There’s a seat pad too to get your bum higher than your feet, necessary for a comfortable and efficient paddling posture. Like the discontinued Feathercraft BayLee (bottom of the page), the NRS has two chambers with simple one-way Boston valves as found on £20 slackrafts and many packrafts now. An inflation bag is an extra $30.
But check out the NRS website reviews – not such glowing reports with regards to durability. It does seem a rather half-backed effort which is a shame as NRS IKs and rafts are famously tough. This guy took his down a rapid-strewn river in Oregon. You may want to skim down to the last few paragraphs. And this guy in the UK bought one in 2015 for more recreational paddling to which the NRS Packraft may be better suited.


aepacklite

Advanced Elements Packlite
Packraft attempts to meet kayak with a splash of slackraft graphics: behold the Advanced Elements Packlite ‘splackraft’Fabric is a similar ripstop PU-coated polyester as used on the Supai (denier unknown). What they call ‘military valves’ (i.e.: IK valves as opposed to Boston valves) are used on the two-chamber hull so the thing ought to pump up firm. That might be the problem as they sem to burst.
The I-beam floor is inflated with a regular twist lock valves to avoid over-pressurisation. The deck net becomes a carry bag and there are a few D-rings, plus the AE signature moulded rubber handle. You won’t get far without that.
Price is $330 and it has to be said this looks like a great combination of interior space, shape and weight, and claims a modest but realistic 250lbs/113kg payload. Problem is you can’t help equating those naff ‘world map’ graphics with a crap pool toy. Tubes look a bit slim and low and it needs a bulky pump, but overdo it and you risk leaks or outright bursts. The video below features an eminently svelte paddler; you wonder if it would sprint so briskly with a bloater like me in it. As is often the case – the genuine reviews on amazon tell the full story. Caveat emptor on this one.


Anfibio
The Anfibio Packraft Store in Germany started by importing other brands and now also collaborates with and sells MRS from China (we tried the MRS Microraft).

3fibs
alfa - 8

With MRS they now have their own brand of Anfibio packrafts which are among the lightest in their class. We tried the Alpha XC (above left). From just €470 + seat, a great deal for a light paddler. The range packrafts now goes right down to a sub-1 kilo crossraft.


kokonirv

Kokopelli
With a range of models from lightweight to white water,as well as tandems (some sold in Europe by Packrafting Store), the distinctively angular shape of US-branded Kokopelli packrafts sets them apart.

kokoleaf

Another distinction is the use of a Leafield valve you’d normally find on a IK or whitewater raft which inflate to higher pressures with pumps. And yet Kokopelli packrafts still inflate with regular air bags and then top off with a detachable mouth tube so it all seems like overkill or being different for the sake of it. A simple Boston valve would do. See this video where they say you can inflate up to 2psi. A K-Pump will easily do that but it’s probably not possible by lung unless you’re 1970s muscleman Franco Columbo who managed to blow up and burst a hot water bottle.

kokofloor

Certainly for paddling efficiency you want as firm a boat as possible, especially once a packraft gets beyond a certain length. But over-inflate it (or leave it in the hot sun) and it may well rupture a seam. (I did that with an IK once.). So lung pressure is safest. The Kokopelli range includes the Nirvana white water boat (left) which comes as a self-bailer or with a deck. Decked packrafts are two-a-penny now, but self-bailing is a more unusual solution to white water packrafting, more common on big white water rafts where you sit on thwarts high above the wet floor.

In a self-bailing packraft or kayak a thick inflated floor pad is needed (or just big fat seats) to get you above the water that will always be present around the floor. Holes round the edges (small picture right, and like the discontinued Baylee, below) see excess water flow out. What pours in over the sides flows right out the draining holes until the water level reaches equilibrium; the boat cannot get swamped.

selfbfailer

I know from IKs that self-bailing can mean a higher centre of gravity due to the thick floor or seat which can lead to instability, but just as with full-size rafts, with wider, flat-bottomed packrafts that’s probably much less of an issue. Depending on how fast it drains, for whitewater I think I’d prefer a bailing packraft to a deck and skirt, but that’s partly why I also prefer open IKs.

twain

Kokopelli’s other main boat is the more sedate and roomy tandem Twain, over 3 metres long weighing nearly 7kg with all the bits including a front seat with a proper backrest, but with 225cm or well over 7 feet of length inside. Two tall adults and gear will not be cramped. Unusually again, the Twain features the Leafield valve, an inflatable floor but also a removable skeg at the back like an IK. You’d think a long boat like this would not have tracking issues any worse than regular sized packrafts.

A packraft like this, as long as a kayak but running on lung-pressure psi, will need all the help it can get to be rigid and not paddle like a soggy Sevylor. Blow it up as hard as you can but I’m not sure a regular low-psi floor will add that much. It’s known that the best packrafts can take much more pressure than we can fill them with – up to 6-8 psi I’ve been told before something goes. Are we already knocking on the door of longer packrafts with high-pressure drop-stitch floors? A detailed Twain review here.


Kraft
pakra

Over in Australia or New Zealand? Then look up PacKraft who make their own boats to order and also sell other brands.


sputnix

Sputnik packrafts found on eBay from under £600. Looks like an Austrian design or brand that’s made in Russia by TimeTrial.
There will be a certain kudos in having enigmatic Cyrillic on your boat but, not unlike the German-designed/Russian made Nortiks (maybe even the same factory?), from 3.7kg for the Sputnik 1, these are relatively heavy boats using tough 420-D hulls with heavy 650g/m2 PVC floors when most others use 210D hulls and 420 TPU floors. Remember: heavy does not always equal robust and durable, as with MTBs it can just mean cheaper.

Sputnik 1 numbers are: 250cm x 100cm, 30cm tubes, a very generous if not baggy 40cm width and ballpark 125 inner length with a load capacity 150kg. The range goes right up to a Sputnik 3 (left) which is a true double at no less than 3.5m long (2.25m inside) with a quarter-ton payload weighing in from 5 kilos.

sputlog

It says they come with a basic inflation bag valve (like old Alpackas) or the Boston-like one-way valve which you can pump up to a little beyond lung power (a better choice IMO, especially for the longer tandem), as well optional fitted decks for white watering.


Longshore International was the only UK branded range of Chinese-made packrafts but closed in 2020 after a couple of years. For our spin on their EX280 click this and discover that China need not be a dirty world. It’s as good as anything out there.