One problem I’ve had sailing my Seawave is the sail tends to sway ever more violently from side to side when the wind gets too strong. This is not just a problem with the WP disc sail I now use (left); it was the same with the Pacific Action V-Sail I used on my Incept K40 in northwest Australia a few years ago. Unable to transfer the wind energy into forward motion, it instead spills over the sides in a flapping frenzy.

It’s well know these downwind sails (especially smaller ones) have a limit of about 15-20 mph beyond which they flip out. But lazily hooking up the WP to my Seawave’s decklines introduces a lot of slack (left) which may exacerbated the swaying. It was only when trying the similar AirSail and later my WP on my packraft in Scotland (at one point with gusts as strong as Australia) that I realised lashing the sail mounts close to the hull eliminated the swaying. At least on a broader bowed packraft.

Out sailing the Seawave the other day, I belatedly succeeded in tensioning the decklines on the water with some ever versatile SoftTies (right). As you can see left, that worked OK but annoyingly it wasn’t as windy as I’d hoped, and not enough to get the WP in a flap.

I’d forgotten to try my stick idea. Whether you use the deck cover on not, you can fix a transverse stick securely under the Seawave bow’s velcro flap and, with another couple of those nifty SoftTies, closely fix the WP to the stick. (I’ll be keeping an eye out for a nice bit of ally tube to replace the weathered old bamboo). Required work and added weight: negligible and it may work on other IKs, too. Something to try for next time.

• 

•